Applications
Tethering Vines
What works:
Easy to transport and install, per vine you will need 2 Spirafix Anchors and 2 brackets. So using the SF50-10-1050 solid head anchor and 2 x SA453 tethering brackets - one anchor and bracket at each end of your vine. For shorter vine lengths smaller anchors will suffice.
How to install:
Easy to install using a sledge hammer or, if you have access, a hand held petrol powered installer on the impact setting - drive the anchor down through the slot in the bracket. We always recommend you protect your anchor head using the appropriately sized manual hammer cup. The bracket should be pointed down the line of the vine. One the anchor collar hits the bracket the anchor is fully installed. Easy to remove using an adjustable ratchet, simply twist out of position, store and reuse when ready.
Always protect the anchor head using a hammer cap.
Always check for buried services.
You can download additional information below.
(Please note that our tethering solutions can be used for a wide range of different projects).